Electronic Components & Devices

FPC/FFC Connectors

6817 Series

One action For High-speed Transmission

One-touch locking 6817 Series FPC/FFC connectors utilize a proprietary structure that enables quick, stable connections in a single insertion, removing a significant impediment to fully automated assembly. Since the actuator can be held open, it is possible to remove FPC/FFC with one hand, and it is also possible to mount the connector on a limited work space.

6817 Series connectors are space-saving: the vertical type that mounts perpendicular to the circuit board for vertical insertion is 5.32mm high on a PCB and 3.0mm wide, and the right-angle type mounting parallel to the board for horizontal insertion is 2.6mm high on a PCB and 5.9mm wide.

This connectors were designed to work with the V-by-One®HS* transmission interface, which reaches speeds up to 3.75Gbps.

* "V-by-One" is registered trademarks of THine Electronics, Inc.

0.5mm Pitch

Typical Applications

Printers / Copiers, Home appliance, Storage Devices, Industrial Equipment etc.

Part No. List by Number of Positions:

Specifications

Vertical type

Profile Height 5.32mm
No. of Positions 10 to 50
Cable Connection Non-ZIF / Vertical
Contact Location Single side
PCB Mounting
Method
SMT
Pitch 0.5mm
Type Non-ZIF / One-action lock
Rated Current DC 0.5A
Rated Voltage DC 50V
Withstanding Voltage AC 200Vrms、1min.
Applicable FPC/FFC Thickness 0.3±0.03mm(Signal))
0.5±0.03mm(Ground)

Right angle type

Profile Height 2.6mm
No. of Positions 10 to 50
Cable Connection Non-ZIF / Right angle
Contact Location Bottom
PCB Mounting
Method
SMT
Pitch 0.5mm
Type Non-ZIF / One-action lock
Rated Current DC 0.5A
Rated Voltage DC 50V
Withstanding Voltage AC 200Vrms、1min.
Applicable FPC/FFC Thickness 0.3±0.03mm(Signal))
0.5±0.03mm(Ground)

Features

  • A unique locking structure with excellent workability that automatically locks just by inserting FPC/FFC.
Insertion operation
  • Since the actuator can be held open, it is possible to remove FPC/FFC with one hand, and it is also possible to mount the connector on a limited work space.
Remove operation
  • One-action type for automatic robotic assembly line. Since the mating failure can be detected by the actuator, it can be visually confirmed as well as judged by an automatic optical inspection device (AOI), contributing to measures against outflow of the half-mated parts.
  • Meets the maximum speed specified in next-generation interfaces V-by-One®HS* adopted in LCD TVs.

    * V-by-One is a registered trademark of THine Electronics, Inc.

  • Vertical and right-angle configurations enhance design flexibility.
  • Packaged in tape and reel: 1,200 pieces/reel (Vertical type), 2,500 pieces/reel (Right angle type)
  • RoHS compliant and halogen-free
  • Contact Material: Copper alloy
  • Insulator Material: Heat-resistant plastic
  • Operating Temperature Range: -40 to +85°C

Plating Specifications

Plating CodeContact AreaTail AreaGroundMetal TabsRoHS Compliance
846+ Au Au Sn-Cu Sn-Cu Yes

Go to FPC/FFC Connectors TOP

Inquiries about products and technical information

Please feel free to contact us. Our staff will reply to your inquiry.