|
|
 |
| CA55 Series |
 |
|
| Gear SCM440 |
 |
 |
| Cutting Conditions: V=150m/min: d=2.5mm: f=0.4mm/rev: Wet: CNMG120408GS |
| · |
CA5525 machined 1.3 times as many workpieces as compared with Competitor K. |
| · |
CA5525 showed superior fracture resistance as compared with Competitor K. |
|
|
|
| PV7020 / TN6020 |
 |
|
| Underbody Parts S50C |
 |
 |
| Cutting Conditions: V=120m/min: d=1.0mm: f=0.25mm/rev: Wet: CNMG120408HS |
| · |
Involved interrupted cutting. |
| · |
PV7020 offered greatly improved tool life. |
|
|
|
| VF Chipbreaker |
 |
|
| Housing SCr420H |
 |
 |
| Cutting Conditions: V=220m/min: d=0.2~1.2mm: f=0.15mm/rev: Wet: VNMG160404VF (CA5025) |
| · |
In comparison with Competitor B, CA5025's VF Chipbreaker insert solved the problem of work-surface scratches by improving chip control, and offered 1.5 times greater tool life. |
|
|
|
|
|
| Magic Drill |
 |
|
| Bracket S45C |
 |
 |
| Cutting Conditions: V=78m/min: d=20mm (Through Hole): f=0.08mm/rev: Wet: S20-DRS10035: DS100 (PR660) |
| · |
Magic Drill Mini showed 2.7 times longer tool life and 5 times better efficiency than conventional tool. |
|
|
|
| PR905 |
|
|
| Knuckle FCD450 |
 |
 |
| Cutting Conditions: V=260m/min (870SFM): d=2~3mm: f=0.2~0.3mm/tooth: SPMN1203 Type (Special Order) |
| · |
PR905 machined 1.25 times as many workpieces as Competitor E (PVD super micro-grain carbide) |
|
|
 |
|
 |
PR905
800 pcs/ edge |
|
Competitor E
640 pcs/ edge |
|
|
|
|
|
|
|
Japanese
