Electronic Components & Devices


Electrical factors

Applied voltage and self-heating temperature

Confirm whether AC voltage and pulse voltage are continuously applied to the capacitor.
Be sure to take into account self-heating when using DC capacitors for AC or pulse circuits.

General capacitors are designed for DC use. When they are used in a circuit where AC or pulse voltage is applied, the current value may increase and the capacitors may short-circuited due to self-heating.

  1. (1) For capacitors of Class 2, it is necessary to maintain the surface temperature shall not increase more
    than 20°C.
  2. (2) For capacitors of Class 1, since the permitted temperature rise depends on the dielectric material, consult us about the details.
    Note: Class 1 : Temperature compensating capacitor (COG, NPO)
    Class 2 : High dielectric constant capacitor (X5R, X7R, Y5V)

When pulse voltage with very short rising time or AC voltage with a high frequency is applied to a capacitors, even within the rated voltage the reliability of the capacitor may be influenced.

When pulse voltage or AC voltage is applied to capacitors, even within the rated voltage, the capacitor may generate heat due to the current.
This self-heating is mainly generated in the dielectric by its dissipation or at the junction between electrodes and dielectric. The self-heating or the current induced by the heat causes the deterioration of insulation and/or damage to the electrodes.
If a current which causes self-heating is below the specified value, the capacitor deteriorates very little. However, if a large current causes a high temperature exceeding the specified value, the deterioration of the capacitor may be accelerated and cause a burnout.

Self-heating of a capacitor depends on the dielectric material, the capacitance, the applied voltage, the frequency, the voltage waveforms and others factors.
Moreover, the surface temperature may be affected by heat radiation related to the style of the capacitor, the mounting method to the equipment and the ambient temperature.
Since self-heating affects the characteristics of capacitors when ambient temperature changes, even under the same voltage conditions, perform the confirmation of self-heating at room temperature (25 °C).
Generally, the correlation of the frequency and voltage, which can be applied to the capacitor, is restricted by peak-to-peak voltage in the low frequency bands, and is restricted by self-heating in the high frequency bands. (See the following figure)
Since circuits used in the field have various kinds of voltage waveforms, it is difficult to prepare such data considering all conditions. Consult the component manufacturers or confirm actual self-heating in the equipment.

Generally, the correlation of the frequency and voltage

Safety Application Guide for Multilayer Ceramic Chip Capacitors All Lists

Inquiries about products and technical information

Please feel free to contact us. Our staff will reply to your inquiry.