| |
 |
Finemicro Drill |
|
| Finemicro Drill |
 |
For Micro-Dia. Metalworking( 0.1mm~) |
|
 |
Stable cutting edge strength and great improvement of fracture resistance are realized due to the new and tough super micro-grain carbide material. |
|
|
Equal high quality edge shape is realized due to Kyocera's fine grinding technology. |
|
|
High efficiency and long tool life drilling is realized due to newly developed super-thin and high performance coat film (FS Coat).
FS of "FS Coat" means Fine Surface and it is the coat film with low friction, smooth surface and high wear resistance. It also contributes to sharp cutting performance and good chip evacuation. |
|
|
Available from dia. 0.1mm to 0.5mm at every 0.01mm |
| Case Study |
|
|
|
 Cutting Conditions |
| Work Material |
: |
SUS304
(t=0.5mm) |
| Tool |
: |
FDM-030(FSA)
Drill Dia. 0.3mm |
| Cutting Speed |
: |
V=10m/min
(N=10,600min ) |
| Feed Rate |
: |
f=0.001mm/rev |
| Coolan |
: |
Wet Cutting (Water Soluble) |
| Depth |
: |
0.5mm(Through Hole) |
| Step Feed Depth |
: |
0.025mm/step |
| Hole Machined |
: |
200 holes |
 |
|
|
Company Data, Oct.21, 2002 |
|
|
| Site use data |
|
| Related link |
|
|
Japan
Drilling
Page Top